.
Rode Wireless GO是世界上體積最小,功能最多的無線麥克風系統。該發射器既可作為夾式麥克風,也可作為世界上最小的腰掛式麥克風發射器,透過2.4GHz數位傳輸超小型相機接收器發送清晰的廣播級音訊。
聲學原理 : 電阻式麥克風
指向方式 : 全向
等效輸入噪聲@最大增益 : 21.8dB
頻率範圍 : 50Hz - 20kHz
外部麥克風輸入 : 20Hz - 20kHz
最大輸出電平 : + 3dBu
最大SPL : 100dB SPL(1kHz @ 1m)
動態範圍 : 100dBA(麥克風前置放大器)
電源要求 : 內置鋰電池可通過USB充電
電池壽命 : 7個小時
模擬輸入 : 3.5mm TRS領夾式麥克風輸入(發射器)
模擬輸出 : 3.5mm TRS(接收器)
電腦連接 : USB(固件更新)
操作系統要求: (僅限固件更新)macos 10.11在Windows 10及更高版本之上
內容物
重量(克)
TX:31 RX:31
尺寸(長x寬x高,毫米)
TX:44×45.3×18.5
RX:44×46.4×18.5
附件
2 x防風毛套,1 x小袋,1 x USB-A至USB-C電纜,1 x SC2電纜
Wireless GO is an ultra-compact digital wireless microphone system which is unique in its clip’n’go versatility, incredibly compact form-factor, and unmatched price accessibility. It’s the perfect wireless mic solution for content creators in all disciplines: filmmakers, on-camera presenters, newsgatherers, vloggers and more.
The Transmitter (TX)
Measuring in at an ultra-compact 44mm x 45.3mm x 18.5mm and weighing just 31g, the Wireless GO transmitter (TX) acts as either a quick and easy clip-on wireless microphone, thanks to a high-quality built-in omnidirectional condenser capsule, or as the world’s smallest beltpack transmitter for a lavalier microphone via the 3.5mm TRS input. The Wireless GO’s quick clip-on capabilities make it perfect for run-and-gun journalists and vloggers in the field: never miss the action as it happens – no cables and great sound.
The Receiver (RX)
The RX is just as compact, measuring only 44mm x 46.4mm x 18.5mm and weighing only 31g, which makes your rig that much easier to carry and facilitates mounting on a range of camera gimbals and stabilisers. Its dual-purpose mount sits snug in your camera’s shoe mount, or clips easily onto your camera strap or an item of clothing. The supplied 3.5mm TRS output cable plugs into your camera’s audio input or, with the relevant available RØDE adaptors, into your recorder, GoPro, iPhone etc. There is also a three-stage output pad – 0dB, -6dB, -12dB – to tailor your output to your camera or recorder.
Features
Wireless GO Specifications
ACOUSTIC & ELECTRICAL SPECIFICATION
Transmission type | 2.4GHz Digital Frequency Agile System |
Acoustic Principle | Pre-polarised pressure transducer |
Polar Pattern | Omnidirectional |
Equivalent Input Noise @ Maximum Gain | 21.8dB (A-Weighted) |
Frequency Range | 50Hz - 20kHz |
External Mic Input | 20Hz - 20kHz |
Maximum Output Level | +3dBu |
Maximum SPL | 100dB SPL (1kHz @ 1m) |
Dynamic Range | 100dBA (Mic Preamplifiers) |
Power Requirements | Inbuilt Li-po battery rechargeable via USB |
Battery Life | Up to 7 hours |
Analog Inputs | 3.5mm TRS lavalier microphone input (transmitter) |
Analog Outputs | 3.5mm TRS (receiver) |
Computer Connectivity | USB (firmware update) |
OS Requirements | (For firmware update only) macOS 10.11 above Windows 10 and above |